Skip to content

Workwear & PPE

Updated 2026-01-27

Kept 4,900 mm of water out after 40 industrial wash cycles

Four jackets, 40 washes, 300 hours of wear across two winter sites.

Lead story · Workwear · $310

Category sponsors

Two sponsor slots are open in Workwear & PPE.

Your logo here, in front of the people who specify and buy this equipment. Sponsorship buys placement — never a verdict.

Become a sponsor →

All workwear & ppe reports

1 reports in Workwear & PPE
DateHeadline
2026-01-27Kept 4,900 mm of water out after 40 industrial wash cycles

Standards that apply here

Manufacturers cite these in spec sheets. Which ones actually protect the buyer, and which ones are marketing.

  • EN ISO 20345

    Safety footwear

    The reference standard. S3 covers most site work; S7 (formerly S3 WR) adds waterproofing.

  • EN 388

    Protective gloves against mechanical risks

    The 4-digit rating tests abrasion, cut, tear and puncture. The new EN ISO 13997 supersedes the old cut test.

  • EN ISO 20471

    High-visibility clothing

    Class 3 is the site-work minimum. Retroreflectivity after 25 wash cycles is the honest test — read the wash count on the spec sheet.

  • NFPA 2112

    Flame-resistant garments for industrial personnel

    The reference for FR workwear on hot-work and oil/gas sites in North America.

Other categories